MySecurpolGroup

Features MySecurpolGroup

MySecurpolGroup is the application of Securpol Group S.r.l.
which allows users to remotely manage Unica and One alarm control panels from the comfort of their smartphone or tablet!Through this application, the user can control various functions of the alarm system depending on the model of control unit installed.
The Application provides for the control of up to 4 systems in WEB, Tunnel or SMS mode.The main functions in WEB and Tunnel mode are listed:- View the status, arm and disarm the individual areas of the system;- Check for the presence of faults or anomalies;-Check the presence and delete the alarm memory;-View the status of the outputs and activate them;-Take photos in case there are sensors equipped with a camera;- Access the history of events, and view any associated photos;-View the status of the system zones and eventually enable/disable them;- View information on the SIM and the GSM signal level of the control unit;The main functions in SMS mode are listed below:- View the status, arm and disarm the individual areas of the system;-View the status of the outputs and activate them;-View SIM information;Application working with all Android versions after 2.2 both on smartphones and tablets.
Both vertical and horizontal modes of operation.For connection from the control panel side, a WAN connection is required for WEB mode and/or a GSM connection for SMS mode.Router port to open: 8002.For connection in Tunnel mode, the control unit must remain permanently connected to the Internet and must be set to "Always Connected" mode.
The connection from the app to the alarm center takes place via a Sicep MvsNET operations center.
The Sicep MvsNET operations center must send an email to the smartphone containing an attachment for configuring the Tunnel mode.
This attachment must be opened with the app.Firmware version required on the Unica control unit: 1.2.0.B121 or later.Default pin: 12345